|
|
|
So you're wanting to install some RAM... now what? The first thing that you need to do is find out which memory works in your computer. If you have the manual that came with your motherboard, now's the time to take a peek. If you don't have it, you're gonna have to look up the specs of your computer on the Internet or crack the case. What we're interested in is the motherboard. Take a look at the picture of one motherboard. Can you find where the memory goes?
Take a look at the closeup picture. There are two long slots on this motherboard. This is where the memory gets installed. This particular type of connector is for SDRAM memory. If your motherboard doesn't have this kind of connection, then you can not install SDRAM. Another name for this memory is DIMM. There are 168 pins on a DIMM that connect inside this slot. Notice in the DIMM slot that there are two places where the connector rises a little. This corresponds to the notches in the memory itself. This ensures that the memory is inserted in the proper direction.  Now that we've verified if your memory will fit or not, it's time for installation. Note that some motherboards require that the DIMM slots be filled in proper order. Look on the motherboard to find the number of each DIMM socket. They are usually numbered starting with 1 but sometimes they begin numbering with 0! Now place the memory module gently inside the slot as shown in the picture below.
 Now, press firmly downward with an even force on the memory module. Ensure that the metal contacts on the memory are seated fully inside the slot. When this is done, Raise the plastic clips on the side. Your RAM has been inserted correctly.  Now try turning on the computer to verify that your computer recognizes the memory you just installed. Most computers will show the memory count right after you turn on the computer. You might need to enter the BIOS to check or make changes. There are a number of ways to enter the BIOS, depending on the maker. Check your maunual. 
| ||
